Lexus 2005 IS300 User Manual page 550

Fastener
2005 LEXUS IS300 (RM1140U)
BODY - FLOOR CARPET
15. w/ Arm Rest:
REMOVE CONSOLE BOX
(a) Using a screwdriver, remove the box side No.1 and No.2
panel.
HINT:
Tape the screwdriver tip before use.
(b) Remove the 2 bolts and console compartment door.
(c) Remove the console box cover rear.
(d) Remove the 6 screws.
H19279
(e) w/o LEXUS navigation system:
Pull the console box rearward to remove it.
(f) w/ LEXUS navigation system:
Pull the console box rearward to remove it, then discon-
nect the connector.
16. REMOVE FOOT REST
(a) Sports pedal type:
Remove the 4 screws and foot rest trim.
(b) Using a screwdriver, remove the foot rest as shown in the
illustration.
H19287
17. REMOVE FLOOR CARPET
(a) Peel off the fastener.
(b) Remove the 2 clips.
(c) Disengage the hooks and remove the floor carpet.
NOTICE:
Be careful not to pull the wire harness.
HINT:
At the time of installation, please refer to the following items.
F
When installing the floor mat, pull out the wire harness
H10962
and levers through the cutout of the floor carpet.
F
There should be no wrinkles or folds after attaching the
floor carpet.
Author : Date :
BO-153
2390