SA-14
SST
SST
SST
2005 LEXUS IS300 (RM1140U)
SUSPENSION AND AXLE
-
DISASSEMBLY
1.
REMOVE GREASE CAP
Using a screwdriver and hammer, remove the grease cap from
the steering knuckle.
2.
REMOVE LOCK NUT
(a)
Mount the axle hub in a soft jaw vise.
HINT:
Close the vise until it holds hub bolts. Do not tighten further.
(b)
Using a chisel and hammer, loosen the staked part of the
lock nut.
(c)
Using a socket wrench (32 mm), remove the lock nut.
3.
REMOVE ABS SPEED SENSOR ROTOR AND AXLE
HUB
F08232
(a)
Remove the 4 bolts and shift the brake dust cover toward
the outside.
(b)
Using SST, remove the ABS speed sensor rotor and axle
hub from the steering knuckle.
SST
NOTICE:
Take care not to scratch the serrations of the sensor rotor.
(c)
Remove the brake dust cover.
F08233
4.
REMOVE INNER RACE (OUTSIDE)
Using SST, remove the inner race from the axle hub.
SST
NOTICE:
Be careful not to damage the axle hub.
F08241
FRONT AXLE HUB
09950- 40011 (09951- 04020, 09952- 04010,
09953-04020, 09954-04010, 09955-04051,
09957-04010, 09958-04011)
09950- 00020, 09950- 40011 (09951- 04020,
09953- 04030, 09957- 04010), 09950- 50013
(09952-05010, 09954-05031, 09955-05040)
Author :
SA0R7-09
Date :
1683