Rear Shock Absorber Installation - Lexus 2005 IS300 User Manual

INSTALLATION
1. INSTALL REAR SHOCK ABSORBER WITH COIL SPRING
(a) Install the suspension support to the body with the 3 nuts.
Torque: 64 N·m (650 kgf·cm, 47 ft·lbf)
(b) Connect the shock absorber with coil spring to the body with the 2 bolts.
Torque: 18 N·m (185 kgf·cm, 13 ft·lbf)
(c) Torque the nut in the center of the suspension support.
Torque: 18 N·m (185 kgf·cm, 13 ft·lbf)
HINT:
If the shock absorber has not been disassembled, it is not necessary to torque the nut.
2. INSTALL NO. 2 LOWER SUSPENSION ARM (See page
3. SEDAN:
INSTALL LUGGAGE COMPARTMENT TRIM SIDE COVER
(a) Install the 4 screws and luggage compartment trim side cover.
(b) Install the 2 bolts and 2 luggage compartment floor hooks.
(c) Install the luggage compartment trim rear cover and luggage compartment trim No. 2 cover.
4. WAGON:
INSTALL DECK TRIM SIDE PANEL ASSEMBLY
(a) Install the deck trim side panel assembly. (See page
(b) Install the rear floor finish plate with 3 clips.
(c) Install the 2 rope hook assemblies and 2 bolts.
(d) Install the deck side trim box LH, RH and the spare wheel cover tray.
(e) Install the rear floor board No. 2, No. 3 and deck board No. 2.
(f) Install the 2 bolts, 2 rope hook assemblies and deck floor box front.
(g) Install the rear floor board No. 4 with 2 bolts.
(h) Install the seat board carpets.
(i) Install the side seatback assembly. (See page
(j) Install the rear seat belt assembly outer with the bolt.
(k) Install the tonneau cover assembly.
(l) Install the rear seat cushion. (See page
5. INSTALL REAR WHEEL
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
6. CHECK REAR WHEEL ALIGNMENT (See page
2005 LEXUS IS300 (RM1140U)
SUSPENSION AND AXLE -
BO-210
REAR SHOCK ABSORBER
SA-125 )
BO-169 )
BO-210 )
)
SA-9 )
Author :
SA-1 17
SA0SO-08
Date :
1786