Front Passenger Airbag Assembly Removal - Lexus 2005 IS300 User Manual

RS-28
SUPPLEMENTAL RESTRAINT SYSTEM
2005 LEXUS IS300 (RM1140U)
- FRONT PASSENGER AIRBAG ASSEMBLY
REMOVAL
NOTICE:
F
If the wiring connector of the SRS is disconnected
and the ignition switch is in ON or ACC position, DTCs
will be recorded.
F
Never use the airbag parts from another vehicle.
When replacing parts, replace them with new parts.
1. DISCONNECT FRONT PASSENGER AIRBAG AS-
SEMBLY CONNECTOR
Open the glove compartment door and disconnect the front
passenger airbag assembly connector.
NOTICE:
When handling the airbag connector, take care not to dam-
age the airbag wire harness.
2. REMOVE GLOVE COMPARTMENT DOOR
(See page
H15685
3. REMOVE CENTER BRACKET
Remove the 3 screws and center bracket.
4. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY
(a) Remove the 2 bolts and nuts from the front passenger air-
bag assembly.
(b) Disconnect the engagement of the claw at 10 positions
and remove the front passenger airbag assembly from
the instrument panel.
CAUTION:
F
Do not store the front passenger airbag assembly
with the airbag deployment side facing downward.
H15528
F
Never disassemble the front passenger airbag as-
sembly.
NOTICE:
When removing the front passenger airbag assembly, take
care not to damage the wire harness.
BO-135 )
Author :
RS02P-08
Date :
1944