Curtain Shield Airbag Assembly Disposal - Lexus 2005 IS300 User Manual

SUPPLEMENTAL RESTRAINT SYSTEM
SST
SST
2005 LEXUS IS300 (RM1140U)
-
DISPOSAL
HINT:
When scrapping vehicles equipped with an SRS or disposing
of the curtain shield airbag assembly always first deploy the air-
bag in accordance with the procedure described below. If any
abnormality occurs with the airbag deployment, contact the
SERVICE DEPT. of TOYOTA MOTOR SALES, U.S.A., INC.
CAUTION:
F
Never dispose of a curtain shield airbag assembly
which has an undeployed airbag.
F
The airbag produces a sizeable exploding sound
when it deploys, so perform the operation out-of-
doors and where it will not create a nuisance to
nearby residents.
F
When deploying the airbag, always use the specified
SST (SRS Airbag Deployment Tool), perform the op-
eration in a place away from electrical noise.
SST
F
When deploying an airbag, perform the operation at
least 10 m (33 ft) away from the airbag assembly.
F
The side airbag assembly is very hot when the airbag
is deployed, so leave it alone for at least 30 minutes
after deployment.
AB0152
F
Use gloves and safety glasses when handling side
airbag assembly with the deployed airbag.
F
Always wash your hands with water after completing
the operation.
F
Do not apply water, etc. to a side airbag assembly with
the deployed airbag.
1. AIRBAG DEPLOYMENT WHEN SCRAPPING VE-
HICLE
HINT:
Battery
Have a battery ready as the power source to deploy the airbag.
(a) Check functioning of the SST (See step 1-(a) on page
RS-17
SST
AB0158
CURTAIN SHIELD AIRBAG ASSEMBLY
09082-00700
).
09082-00700
Author :
RS-59
RS0N5-08
Date :
1975