Fuel Pressure Regulator Removal - Lexus 2005 IS300 User Manual

Snap Claw
Disconnect
2005 LEXUS IS300 (RM1140U)
REMOVAL
1.
2.
Pry
(a)
Pry
NOTICE:
Be careful not to damage the suction supports.
(b)
B01884
3.
(a)
(b)
(c)
Pull
B01886
SFI - FUEL PRESSURE REGULATOR
REMOVE FUEL PUMP AND SENDER GAUGE AS-
SEMBLY FROM FUEL TANK (See page
REMOVE NO. 2 FUEL SUCTION SUPPORT
Using 2 screwdrivers, disconnect the 4 snap claws from
the claw holes and remove the fuel suction support.
Remove the rubber cushion.
REMOVE FUEL PRESSURE REGULATOR AND FUEL
RETURN JET TUBE ASSEMBLY
Disconnect the fuel return jet tube from the clamp of the
No.2 fuel suction support.
Pull out the fuel pressure regulator from the fuel filter, and
remove the fuel pressure regulator and fuel return jet tube
assembly.
Remove the O-ring from the fuel pressure regulator.
Author :
SF-17
SF0N7-09
SF-1 1)
Date :
1398