SST (B)
2005 LEXUS IS300 (RM1140U)
CHARGING
DISASSEMBLY
1.
(a)
B01655
(b)
Plate Terminal
B01654
2.
(a)
(b)
B01997
3.
(a)
(b)
B01650
4.
(a)
Turn
SST (A)
(b)
P10835
-
GENERATOR
REMOVE REAR END COVER
Remove the nut and terminal insulator.
Remove the bolt, 3 nuts, plate terminal, end cover and
brush holder cover.
REMOVE BRUSH HOLDER AND VOLTAGE REGULA-
TOR
Remove the 5 screws, brush holder and voltage regulator.
Remove the seal plate from the rectifier end frame.
REMOVE RECTIFIER HOLDER
Remove the 4 screws and rectifier holder.
Remove the 4 rubber insulators.
REMOVE PULLEY
Hold SST (A) with a torque wrench, and tighten SST (B)
clockwise to the specified torque.
SST
09820-6301 1
Torque: 39 N·m (400 kgf·cm, 29 ft·lbf)
Check that SST (A) is secured to the rotor shaft.
Author :
CH-7
CH046-10
Date :
1545