Lexus 2005 IS300 User Manual page 1154

SR-44
SST
SST
Oil Seal
SST
2005 LEXUS IS300 (RM1140U)
STEERING
SST
F07506
Vinyl Tape
F12246
F07508
F12247
F16558
- POWER STEERING GEAR
10. REMOVE BEARING GUIDE NUT AND CONTROL
VALVE ASSEMBLY
(a) Using SST, loosen the bearing guide nut.
SST 09631-20060
(b) To prevent oil seal lip damage, wind vinyl tape on the ser-
rated part of the control valve shaft.
(c) Using a plastic hammer, tap out the control valve assem-
bly with the bearing guide nut from the control valve hous-
ing.
NOTICE:
Be careful not to damage the oil seal lip
(d) Remove the bearing guide nut from the control valve as-
sembly.
(e) Remove the O-ring from the bearing guide nut.
11. REMOVE CYLINDER END STOPPER AND SPACER
(a) Using SST, remove the cylinder end stopper.
SST 09631-20090
(b) Remove the O-ring from the cylinder end stopper.
(c) Remove the spacer.
12. REMOVE STEERING RACK WITH OIL SEAL
(a) Using SST, press out the steering rack with the oil seal.
SST 09950-70010 (09951-07200)
NOTICE:
Take care not to drop the steering rack.
(b) Remove the oil seal from the steering rack.
13. REMOVE OIL SEAL
(a) Install SST (09612-07130) on SST (09612-07210).
SST 09612-70100 (09612-07130, 09612-07210)
NOTICE:
F
Before using them, apply a small dab of grease to the
inside wall of SST (09612-07210, 09612-07130).
F
To prevent the inside of the housing from being dam-
aged securely install SST 09612- 07130) on SST
(09612-07210).
Author : Date :
1902