Power Steering Vane Pump Installation - Lexus 2005 IS300 User Manual

Stopper
2005 LEXUS IS300 (RM1140U)
STEERING
INSTALLATION
1.
Install the PS vane pump assembly with the 2 bolts.
2.
(a)
F12199
(b)
F12202
HINT:
Make sure the stopper of the pressure feed tube touches the
PS vane pump body as shown in the illustration, then install the
union bolt.
3.
Connect the return hose with the clip.
4.
F10354
5.
Using SST, loosen the drive belt tension by tuning the drive belt
SST
tensioner clockwise from the bottom side, and install the drive
belt.
6.
Install the No. 1 engine under cover with the 16 screws and clip.
7.
I22629
- POWER STEERING VANE PUMP
INSTALL PS VANE PUMP ASSEMBLY
Torque: 58 N·m (590 kgf·cm, 43 ft·lbf)
CONNECT PRESSURE FEED TUBE
Install a new gasket to the pressure feed tube.
Connect the pressure feed tube with the union bolt.
Torque: 49 N·m (500 kgf·cm, 36 ft·lbf)
CONNECT RETURN HOSE
CONNECT OIL PRESSURE SWITCH CONNECTOR
INSTALL DRIVE BELT
SST 09216-00041
INSTALL NO. 1 ENGINE UNDER COVER
BLEED POWER STEERING SYSTEM
(See page SR-4 )
Author :
SR-37
SR1C0-03
Date :
1895