Power Steering Vane Pump Replacement - Lexus 2005 IS300 User Manual

SR-34
Front Housing
Oil Seal
Press
Vinyl Tape
Vane Pump
Shaft
Bearing
REMOVE
2005 LEXUS IS300 (RM1140U)
STEERING
REPLACEMENT
NOTICE:
When using a vise, do not overtighten it.
1.
(a)
NOTICE:
Be careful not to damage the bushing of the front housing.
W01743
(b)
Press
(c)
SST
NOTICE:
Make sure that the oil seal is installed facing in the correct
direction.
F02574
2.
(a)
(b)
NOTICE:
Be careful not to damage the shaft.
(c)
(d)
INSTALL
W01280
- POWER STEERING VANE PUMP
IF NECESSARY, REPLACE OIL SEAL
Using SST, tap out the oil seal from the front housing.
SST 09631-10030
Coat a new oil seal lip with power steering fluid.
Using SST, press in the oil seal.
SST 09950-60010 (09951-00330),
09950-70010 (09951-07100)
IF NECESSARY, REPLACE BEARING
Press out the bearing from the vane pump shaft.
Using snap ring expander, replace the snap ring with new
one.
Coat a new bearing with power steering fluid.
Press in the bearing to the shaft.
Author :
SR1BY-02
Date :
1892