Front Shock Absorber Reassembly - Lexus 2005 IS300 User Manual

SA-26
SST
Speed Sensor
Front
Harness Clamp
42° ± 2° 42° ± 2°
2005 LEXUS IS300 (RM1140U)
SUSPENSION AND AXLE
REASSEMBLY
1.
2.
(a)
NOTICE:
Do not use an impact wrench. It will damage the SST.
(b)
HINT:
Fit the lower end of the coil spring into the gap of the spring seat
F07650
of the shock absorber.
3.
4.
(a)
HINT:
Align the bolt of the suspension support with the cut-out of the
upper insulator.
(b)
F12947
(c)
Speed Sensor
Harness Clamp
5.
HINT:
After removing the SST, recheck the direction of the suspension
support.
F07651
- FRONT SHOCK ABSORBER
INSTALL SPRING BUMPER TO PISTON ROD
INSTALL COIL SPRING
Using SST, compress the coil spring.
SST 09727- 30021 (09727- 00010, 09727- 00021,
09727-00031)
Install the coil spring to the shock absorber.
INSTALL UPPER INSULATOR TO SHOCK ABSORBER
INSTALL SUSPENSION SUPPORT
Install the suspension support to the shock absorber, as
shown in the illustration.
Temporarily tighten a new lock nut.
Align the suspension support with the shock absorber
lower bolt as shown in the illustration.
REMOVE SST
SST 09727- 30021 (09727- 00010, 09727- 00021,
09727-00031)
Author :
SA0RG-08
Date :
1695