Lexus 2005 IS300 User Manual page 1124

SR-14
A
B
Matchmarks
2005 LEXUS IS300 (RM1140U)
STEERING - TILT STEERING COLUMN
3. REMOVE FRONT DOOR INSIDE SCUFF PLATE AND
COWL SIDE TRIM BOARD
(a) Remove the front door inside scuff plate.
(b) Remove the clip and cowl side trim board.
4. REMOVE LOWER FINISH PANEL
(a) Remove the 3 screws.
(b) Disconnect the connectors and remove the lower finish
panel.
(c) Disconnect the hood lock control cable.
5. REMOVE CLUSTER FINISH PANEL
(a) Remove the 2 screws.
(b) Disconnect the connector and remove the cluster finish
panel.
6. REMOVE COLUMN UPPER AND LOWER COVERS
(a) Remove the 3 screws and column lower cover.
(b) Remove the column upper cover.
7. REMOVE COMBINATION SWITCH WITH SPIRAL
CABLE
(a) Disconnect the connectors.
(b) Disconnect the airbag connector.
(c) Remove the 3 screws and combination switch.
8. REMOVE SPIRAL CABLE
NOTICE:
Do not disassemble the cable or apply oil to it.
9. REMOVE UNDER COVER
Remove the 5 screws, 2 nuts and under cover.
10. DISCONNECT SLIDING YOKE
(a) Place matchmarks on the sliding yoke and control valve
shaft.
(b) Loosen the bolt "A" and remove the bolt "B".
(c) Disconnect the sliding yoke.
11. DISCONNECT BRAKE PEDAL RETURN SPRING
12. REMOVE INSTRUMENT PANEL LOWER PAD INSERT
Remove the 3 bolts and instrument panel lower pad insert.
F12192
13. DISCONNECT HEATER TO REGISTER DUCT
Remove the 2 screws and disconnect heater to register duct.
14. REMOVE STEERING COLUMN ASSEMBLY
(a) Loosen the clamp.
(b) Disconnect the connectors.
(c) Remove the 4 nuts and steering column assembly.
F12193
Author : Date :
1872