SST
Oil Seal
SST
SST
SST
Bearing
Oil Seal
SST
2005 LEXUS IS300 (RM1140U)
STEERING
REPLACEMENT
NOTICE:
When using a vise, do not overtighten it.
1.
(a)
Bearing
F12249
(b)
(c)
NOTICE:
Oil Seal
Make sure that the oil seal is installed facing in the correct
direction.
F07512
(d)
(e)
F07513
2.
Press
(a)
SST
Oil Seal
W01749
(b)
Press
(c)
SST
NOTICE:
Make sure that the oil seal is installed facing in the correct
direction.
W01750
-
POWER STEERING GEAR
IF NECESSARY, REPLACE OIL SEAL AND BEARING
Using SST, press out the bearing and oil seal from the
control valve housing.
SST
09950-60010 (09951-00240),
09950-70010 (09951-07100)
Coat a new oil seal lip with power steering fluid.
Using SST, press in the oil seal.
SST
09950- 60010 (09951- 00180, 09951- 00320,
09952-06010), 09950-70010 (09951-07150)
Coat a new bearing with molybdenum disulfide lithium
base grease.
Using SST, press in the bearing.
SST
09950-60010 (09951-00340),
09950-70010 (09951-07150)
IF NECESSARY, REPLACE OIL SEAL
Using SST, press out the oil seal from the bearing guide
nut.
SST
09950-60010 (09951-00310),
09950-70010 (09951-07100)
Coat a new oil seal lip with power steering fluid.
Using SST, press in the oil seal.
SST
09950- 60010 (09951- 00250, 09951- 00360,
09952-06010), 09950-70010 (09951-07100)
Author :
SR-47
SR0UJ-03
Date :
1905