Lexus 2005 IS300 User Manual page 1213

SUPPLEMENTAL RESTRAINT SYSTEM
10 m (33 ft) or more
2005 LEXUS IS300 (RM1140U)
(b) Disconnect the side airbag assembly connector.
NOTICE:
When handling the airbag connector, take care not to dam-
age the airbag wire harness.
H08478
(c) Install the SST.
(1)
SST
Battery
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
SST
H08479
(2)
(3)
NOTICE:
Take care not to damage the SST wire harness.
(4)
R13455
(d) Deploy the airbag.
(1)
(2)
CAUTION:
F
The side airbag assembly is very hot when the airbag
is deployed, so leave it alone for at least 30 minutes
after deployment.
H08480
F
Use gloves and safety glasses when handling a side
airbag assembly with the deployed airbag.
F
Do not apply water, etc. to a side airbag assembly with
the deployed airbag.
F
Always wash your hands with water after completing
the operation.
F
When scrapping a vehicle, deploy the airbag and
scrap the vehicle with the side airbag assembly still
installed.
- SIDE AIRBAG ASSEMBLY
Connect the connector of 2 SST to the side airbag
assembly connector.
09082-00700, 09082-00750
Move the SST at least 10 m (33 ft) away from the
front of the vehicle.
Close all the doors and windows of the vehicle.
Connect the SST red clip to the battery positive (+)
terminal and the black clip to the battery negative
(-) terminal.
Check that no one is inside the vehicle or within 10
m (33 ft) area around the vehicle.
Press the SST activation switch and deploy the air-
bag.
Author :
RS-45
Date :
1961