Airbag Sensor Assembly Removal - Lexus 2005 IS300 User Manual

RS-68
SUPPLEMENTAL RESTRAINT SYSTEM
2005 LEXUS IS300 (RM1140U)
- AIRBAG SENSOR ASSEMBLY
REMOVAL
NOTICE:
Do not open the cover or the case of the ECU and various
electrical devices unless absolutely necessary.
(If the IC terminals are touched, the IC may be destroyed by
static electricity.)
HINT:
For step 1 to 8, refer to page
1. REMOVE FLOOR SHIFT LEVER KNOB
2. REMOVE UPPER CONSOLE PANEL
3. REMOVE CENTER REGISTER OPENING COVER
4. REMOVE CENTER CLUSTER FINISH PANEL
5. REMOVE LOWER CENTER CLUSTER FINISH PANEL
6. REMOVE A/C CONTROL WITH RADIO RECEIVER AS-
SEMBLY
7. REMOVE PARKING BRAKE HOLE COVER
8. REMOVE CONSOLE BOX
9. REMOVE CONTROL POSITION INDICATOR PLATE
(a) Disconnect the connector.
(b) Disconnect the engagement of the claw at 4 positions and
remove the control position indicator plate.
10. REMOVE AIRBAG SENSOR ASSEMBLY
(a) Disconnect the 3 airbag sensor assembly connectors.
NOTICE:
Disconnect the connectors with the sensor assembly
installed.
(b) Using a torx wrench, remove the 3 screws and airbag sen-
sor assembly.
Torx wrench: T40 (Part No.09042-00020 or locally
manufactured tool)
H08433
BO-139 .
Author : Date :
RS0EY-13
1984