Fuel Pressure Regulator Installation - Lexus 2005 IS300 User Manual

SF-18
Snap Claw
Push
2005 LEXUS IS300 (RM1140U)
Connect
Push
B02061
B07353
B02039
SFI - FUEL PRESSURE REGULATOR
INSTALLATION
1. INSTALL FUEL PRESSURE REGULATOR AND FUEL
RETURN JET TUBE ASSEMBLY
(a) Apply a light coat of gasoline to a new O-ring, and install
it to the fuel pressure regulator.
(b) Push in the fuel pressure regulator to the fuel filter.
(c) Check that the fuel pressure regulator rotates smoothly.
If it does not rotates smoothly, the O-ring may be pinched, so
remove the fuel pressure regulator and perform again steps (b)
and (c) above.
(d) Connect the fuel return jet tube to the clamp of the No. 2
fuel suction support.
2. INSTALL NO. 2 FUEL SUCTION SUPPORT
(a) Install the rubber cushion to the fuel pump.
(b) Push the fuel suction support, and attach the 4 snap
claws to the claw holes.
3. INSTALL FUEL PUMP AND SENDER GAUGE AS-
SEMBLY TO FUEL TANK (See page
Author :
SF0N8-09
SF-13 )
Date :
1399