Rear Stabilizer Bar Installation - Lexus 2005 IS300 User Manual

2005 LEXUS IS300 (RM1140U)
SUSPENSION AND AXLE
INSTALLATION
Paint Line
1.
HINT:
F
F
F08231
2.
(a)
(b)
HINT:
If the ball joint turns together with the nut, use a hexagon
F07697
wrench (5 mm) to hold the stud.
- REAR STABILIZER BAR
INSTALL 2 BUSHINGS AND BRACKETS TO STABILIZ-
ER BAR
Install the bushing to the outside of the paint line on the
stabilizer bar.
Install the bushing to the stabilizer bar so that the cutout
of the bushing faces the rear of the vehicle, as shown in
the illustration.
INSTALL STABILIZER BAR
Install the stabilizer bar to the body with the 4 bolts.
Torque: 18 N·m (185 kgf·cm, 13 ft·lbf)
Install the 2 stabilizer bar links with the 2 bolts and 4 nuts.
Torque:
Bolt: 30 N·m (305 kgf·cm, 22 ft·lbf)
Nut: 65 N·m (663 kgf·cm, 48 ft·lbf)
Author :
SA-133
SA1JP-05
Date :
1802