Lexus 2005 IS300 User Manual page 1294

SA-108
B
A
2005 LEXUS IS300 (RM1140U)
SUSPENSION AND AXLE -
17. CONNECT HEIGHT CONTROL SENSOR LINK
(a) Set the lower arm to the vehicle height.
(b) Install the sensor link to the lower arm bracket with a nut.
Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
NOTICE:
F
Be careful not to brake the link fixing pin until the
above operation is completed.
F
The pin can be broken after completion of the above,
however, the sensor arm rotation angle shall not ex-
F11611
ceed the range of ± 70° from the standard vehicle
height.
18. INSTALL RH AND LH BRAKE CALIPERS TO STEER-
ING KNUCKLES
Torque: 104 N·m (1,065 kgf·cm, 77 ft·lbf)
19. INSTALL RH AND LH REAR FENDER APRON SEALS
20. CONNECT RH AND LH ABS SPEED SENSORS AND
WIRE HARNESS
Torque:
Bolt A: 8.0 N·m (82 kgf·cm, 71 in.·lbf)
Bolt B: 5.0 N·m (51 kgf·cm, 44 in.·lbf)
21. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY
(See page
22. INSTALL REAR WHEELS
Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)
F08222
23. DEPRESS BRAKE PEDAL SEVERAL TIMES
24. CHECK REAR WHEEL ALIGNMENT
(See page
25. CHECK ABS SPEED SENSOR SIGNAL
w/o VSC (See page
w/VSC (See page
DIFFERENTIAL MOUNTING CUSHION
SA-99 )
SA-9 )
DI-437
DI-507 )
Author :
)
Date :
1777