Lexus 2005 IS300 User Manual page 1155

SST
SST
2005 LEXUS IS300 (RM1140U)
STEERING
SST
F16559
F16560
SST
SST
F16561
SST
F16563
- POWER STEERING GEAR
(b) Diagonally insert SST (09612-07210) into the housing
until it contacts with the oil seal, and then further insert the
SST (09612-07210) until the tip of SST (09612-07220)
contacts with SST (09612-07130).
SST 09612- 70100 (09612- 07130, 09612- 07210,
09612-07220)
NOTICE:
Do not damage the inside of the housing.
(c) Secure SST
(09612-07210) to place SST (09612-07130) in the hous-
ing.
SST 09612- 70100 (09612- 07130, 09612- 07210,
09612-07220)
HINT:
Place SST on the chamfering position between the oil seal and
rack housing.
(d) Remove the SST (09612-07210, 09612-07220).
SST 09612-70100 (09612-07210, 09612-07220)
(e) After installing SST (09612- 07240) on SST
(09612-07210), insert the tip of SST (09612-07230) in
the service hole of SST (09612-07130).
SST 09612- 70100 (09612- 07130, 09612- 07230,
09612-07240)
NOTICE:
F
Before using them, apply a small dab of grease to the
tip of SST (09612-07230).
F
To prevent SST (09612-07130) from being damaged,
be sure to install SST (09612-07240).
F
Do not damage the inside of the rack housing.
(f) Install SST (09951-07100) on SST (09612-07230) and
remove the oil seal using a press.
SST 09612- 70100 (09612- 07130, 09612- 07230,
09612-07240), 09950-70010 (09951-07100)
NOTICE:
Do not damage the rack housing.
HINT:
Replace SST (09951-07100) with SST that is different in length
in the set, if necessary.
Author :
(09612- 07220), and
Date :
SR-45
pull SST
1903