Lexus 2005 IS300 User Manual page 1202

RS-34
SUPPLEMENTAL RESTRAINT SYSTEM
Stripped Wire Harness Section
2 times or more
2005 LEXUS IS300 (RM1140U)
Wire Harness
Diameter
AB0163
H08452
Width
Inner
Diam.
R08582
- FRONT PASSENGER AIRBAG ASSEMBLY
(b) Using a service-purpose wire harness for the vehicle, tie
down the front passenger airbag assembly to the tire.
Wire harness: Stripped wire harness section
2
1.25 mm or more (0.0019 in.
CAUTION:
If the front passenger airbag assembly is tied down with
too thin wire harness, it may snap. This is highly danger-
ous. Always use a wire harness which is at least 1.25 mm
2
(0.0019 in. ).
HINT:
To calculate the square of the stripped wire harness section:
Square = 3.14 X (Diameter)
(1) Pass the wire harness through the installation
holes, as shown in the illustration.
(2) Position the front passenger airbag assembly in-
side the tire with the airbag deployment side facing
inside. Tie the front passenger airbag assembly to
the tire, as shown in the illustration.
Tire size: Must exceed the following dimensions-
Width: 185 mm (7.28 in.)
Inner diameter: 360 mm (14.17 in.)
CAUTION:
F
Make sure that the wire harness is tight. It is very dan-
gerous if looseness in the wire harness results in the
front passenger airbag assembly coming free due to
the shock from the airbag deploying.
F
Always tie down the front passenger airbag assembly
with the airbag deployment side facing inside.
NOTICE:
The tire will be marked by the airbag deployment, so use a
redundant tire.
Author :
2
or more)
2
divided by 4
Date :
2
1950