Lexus 2005 IS300 User Manual page 1200

RS-32
SUPPLEMENTAL RESTRAINT SYSTEM
SST
10 m (33 ft) or more
2005 LEXUS IS300 (RM1140U)
- FRONT PASSENGER AIRBAG ASSEMBLY
(b) Disconnect the front passenger airbag assembly connec-
tor.
Open the glove compartment door and disconnect the
front passenger airbag assembly connector.
NOTICE:
When handling the airbag connector, take care not to dam-
age the airbag wire harness.
H15685
(c) Install the SST.
(1) Connect the connector of 2 SST to the front passen-
ger airbag assembly connector.
SST 09082-00700, 09082-00760
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
H15530
(2) Move the SST to at least 10 m (33 ft) away from the
front of the vehicle.
(3) Close all the doors and windows of the vehicle.
NOTICE:
Take care not to damage the SST wire harness.
(4) Connect the SST red clip to the battery positive (+)
terminal and the black clip to the negative (-) termi-
nal.
R13455
(d) Deploy the airbag.
(1) Check that no one is inside the vehicle or within 10
m (33 ft) area around the vehicle.
(2) Press the SST activation switch and deploy the air-
bag.
CAUTION:
F
The front passenger airbag assembly is very hot
when the airbag is deployed, so leave it alone for at
least 30 minutes after deployment.
H03286
F
Use gloves and safety glasses when handling a front
passenger airbag assembly with deployed airbag.
F
Always wash your hands with water after completing
the operation.
F
Do not apply water, etc. to a front passenger airbag
assembly with deployed airbag.
F
When moving a vehicle for scrapping which has a
front passenger airbag assembly with deployed air-
bag, use gloves and safety glasses.
Author : Date :
1948