Front Lower Suspension Arm Installation - Lexus 2005 IS300 User Manual

Matchmarks
B
2005 LEXUS IS300 (RM1140U)
SUSPENSION AND AXLE
INSTALLATION
1.
2.
(a)
HINT:
After stabilizing the suspension, align the matchmarks on the
cam plate and suspension member, and torque the nut.
(b)
F07666
(c)
If the holes for the cotter pin are not aligned, tighten the nut fur-
ther up to 60°.
3.
NOTICE:
Be careful not to damage the return tube and pressure feed
tube.
4.
5.
A
HINT:
If the ball joint turns together with the nut, use a hexagon
wrench (5 mm) to hold the stud.
F07660
- FRONT LOWER SUSPENSION ARM
INSTALL SHOCK ABSORBER LOWER BRACKET TO
NO. 1 LOWER SUSPENSION ARM
Torque: 25 N·m (250 kgf·cm, 18 ft·lbf)
INSTALL NO. 1 LOWER SUSPENSION ARM
Install the No. 1 lower suspension arm to the suspension
member with the cam bolt, cam plate, washer and nut.
Torque: 184 N·m (1,880 kgf·cm, 136 ft·lbf)
Connect the lower ball joint to the No. 1 lower suspension
arm with the nut.
Torque: 123 N·m (1,250 kgf·cm, 91 ft·lbf)
Install a new cotter pin.
CONNECT STEERING GEAR ASSEMBLY
Torque: 74 N·m (755 kgf·cm, 55 ft·lbf)
CONNECT SHOCK ABSORBER TO FRONT SHOCK
ABSORBER BRACKET
Torque: 64 N·m (650 kgf·cm, 47 ft·lbf)
INSTALL STABILIZER BAR LINK
Torque:
Nut A: 49 N·m (500 kgf·cm, 36 ft·lbf)
Nut B: 95 N·m (970 kgf·cm, 70 ft·lbf)
Author :
SA-37
SA20L-02
Date :
1706