SF-26
SST
2005 LEXUS IS300 (RM1140U)
SFI
-
FUEL PRESSURE PULSATION DAMPER
REMOVAL
1.
REMOVE ENGINE COVER
Remove the 4 nuts and engine cover.
2.
DISCONNECT CONNECTOR AND HOSES
(a)
Disconnect the VSV connector for the EVAP.
(b)
Disconnect the EVAP hose from the EVAP pipe.
(c)
Disconnect the vacuum hose (from No. 2 vacuum pipe)
from the air intake chamber.
B09504
3.
REMOVE FUEL PRESSURE PULSATION DAMPER
(a)
Remove the nut holding the No. 2 vacuum pipe to the in-
take manifold.
(b)
Remove the bolt holding the fuel inlet pipe to the intake
manifold.
B01582
(c)
Using SST, remove the pulsation damper and 2 gaskets.
SST 09612-24014 (09617-24011)
CAUTION:
F
Put a shop towel under the delivery pipe.
F
Slowly loosen the pulsation damper.
B09505
Author :
Date :
SF0NF-07
1407