Lexus 2005 IS300 User Manual page 1293

LH side:
RH side (M/T only):
B
B
A
A
2005 LEXUS IS300 (RM1140U)
SUSPENSION AND AXLE
12.
Using SST, install the cushion so that the marks are positioned,
as shown in the illustration.
NOTICE:
F
F
SST
F
13.
(a)
Mark
F07704
Marks
F07706
(b)
B
B
A
(c)
14.
A
15.
F11565
16.
- DIFFERENTIAL MOUNTING CUSHION
INSTALL DIFFERENTIAL MOUNTING CUSHION
SST 09570-24010
Be careful not to confuse RH and LH sides, and its top
and bottom.
Set the SST after temporarily installing the differential
mounting cushion into the member so as not to install
at an angle.
To confirm that the differential mounting cushion is
aligned straight in relation to the member, check that
the SST is fully in contact with all of the cushion.
INSTALL REAR SUSPENSION MEMBER
Install the rear suspension member rear upper and lower
stoppers to the rear suspension member.
Install the 2 differential support member lower stopper,
rear suspension member stopper with the 8 bolts.
Torque:
A bolt: 127 N·m (1,300 kgf·cm, 94 ft·lbf)
B bolt: 19 N·m (195 kgf·cm, 14 ft·lbf)
Lower the jack.
CONNECT PARKING BRAKE CABLE
Torque: 7.8 N·m (80 kgf·cm, 69 in.·lbf)
INSTALL RH AND LH REAR SUSPENSION MEMBER
LOWER BRACES
Torque: 19 N·m (195 kgf·cm, 14 ft·lbf)
CONNECT RH AND LH SHOCK ABSORBERS TO
NO. 2 LOWER SUSPENSION ARMS
Torque: 110 N·m (1,120 kgf·cm, 81 ft·lbf)
Author :
SA-107
Date :
1776