Lexus 2005 IS300 User Manual page 1186

RS-18
SUPPLEMENTAL RESTRAINT SYSTEM
SST
SST
SST
SST
2005 LEXUS IS300 (RM1140U)
(a) Check functioning of the SST.
CAUTION:
When deploying the airbag, always use the specified SST:
SRS Airbag Deployment Tool.
SST
AB0152
(1)
Battery
HINT:
Do not connect the yellow connector which will be connected
with the supplemental restraint system.
AB0158
(2)
CAUTION:
If the LED lights up when the activation switch is not being
pressed, SST malfunction is probable, so definitely do not
use the SST.
(3)
H01580
(b) Install the SST.
CAUTION:
Check that there is no looseness in the steering wheel and
steering wheel pad.
(1)
(2)
H15714
(3)
SST
NOTICE:
To avoid damaging the connector of the SST and wire har-
ness, do not lock the secondary lock of the twin lock.
H15216
- STEERING WHEEL PAD AND SPIRAL CABLE
09082-00700
Connect the SST to the battery.
Connect the red clip of the SST to the battery posi-
tive (+) terminal and the black clip to the battery neg-
ative (-) terminal.
Check functioning of the SST.
Press the SST activation switch, and check that the
LED of the SST activation switch lights up.
Disconnect the SST from the battery.
While turning the steering wheel right/left, remove
the 3 screws and column lower cover.
Disconnect the airbag connector of the spiral cable.
Connect the SST connector to the airbag connector
of the spiral cable.
09082-00700
Author : Date :
1934