Spring Nut
SST
2005 LEXUS IS300 (RM1140U)
STEERING
-
TILT STEERING COLUMN
6.
INSTALL TILT LEVER ASSEMBLY
(a)
Install the 2 bushings to the upper column tube sub-as-
sembly.
(b)
Install the tilt lever assembly with a new spring nut.
NOTICE:
Make sure that the spring nut is installed facing in the cor-
rect direction.
(c)
Install the tilt lever link.
F07927
(d)
Install the tension spring.
NOTICE:
Make sure that the tension spring is installed facing in the
correct direction.
7.
INSTALL TURN SIGNAL BRACKET
(a)
Install the turn signal bracket with the 2 bolts.
Torque: 2.9 N·m (30 kgf·cm, 26 in.·lbf)
F07955
(b)
Using pliers, install the tension spring.
NOTICE:
Make sure that the tension spring is installed facing in the
correct direction.
F07928
8.
INSTALL 2 TENSION SPRINGS
Using SST, install the 2 tension springs.
SST
09703-30010
9.
INSTALL COLUMN PROTECTOR
Install the column protector with the 2 bolts.
Torque: 6.1 N·m (60 kgf·cm, 52 in.·lbf)
F07918
10.
INSTALL 2 ENERGY ABSORBING PLATES
(a)
Install the 2 new energy absorbing plate guides and ener-
gy absorbing plates.
(b)
Install the 2 new energy absorbing clips.
11.
INSTALL COLUMN TUBE SUPPORT
(a)
Install the lower column tube attachment to the column
tube support.
(b)
Install the column tube support with the lower column
tube attachment with the bolt.
F07954
Torque: 15 N·m (150 kgf·cm, 11 ft·lbf)
Author :
Date :
SR-23
1881