Side Airbag Assembly Removal - Lexus 2005 IS300 User Manual

RS-40
SUPPLEMENTAL RESTRAINT SYSTEM
2005 LEXUS IS300 (RM1140U)
-
REMOVAL
NOTICE:
F
If the wiring connector of the SRS is disconnected
and the ignition switch is at ON or ACC position, DTCs
will be recorded.
F
Never use the airbag parts from another vehicle.
When replacing parts, replace them with new parts.
1. REMOVE FRONT SEAT
(a) Remove the 2 seat track covers and 4 bolts.
(b) Disconnect the connectors under the front seat.
NOTICE:
When handling the airbag connector, take care not to dam-
age the airbag wire harness.
(c) Remove the front seat.
2. REMOVE HEADREST
H08478
3. REMOVE FRONT SEAT AIRBAG DOOR
(a) Using a screwdriver, remove the 2 covers.
HINT:
Tape the screwdriver tip before use.
H08466
(b) Remove the 2 bolts.
(c) Slide up the front seat airbag door and remove it.
4. Power adjuster type:
REMOVE POWER SEAT SWITCH KNOBS
Slide Up
H08467
5. Manual adjuster type:
REMOVE RECLINING ADJUSTER KNOB
Remove the screw and reclining adjuster knob.
H08463
SIDE AIRBAG ASSEMBLY
Author :
RS0HL-01
Date :
1956