Lexus 2005 IS300 User Manual page 1228

RS-60
SUPPLEMENTAL RESTRAINT SYSTEM
SST
SST
Battery
SST
10 m (33 ft) or more
2005 LEXUS IS300 (RM1140U)
- CURTAIN SHIELD AIRBAG ASSEMBLY
(b) Disconnect the curtain shield airbag connector.
NOTICE:
When handling the airbag connector, take care not to dam-
age the airbag wire harness.
(c) Install the SST.
(1) Connect the connectors of the 2 SST to the airbag
connector.
SST 09082-00700, 09082-00760
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
H19109
(2) Move the SST at least 10 m (33 ft) away from the
front of the vehicle.
(3) Close all the doors and windows of the vehicle.
NOTICE:
Take care not to damage the SST wire harness.
(4) Connect the SST red clip to the battery positive (+)
terminal and the black clip to the battery negative
(-) terminal.
R13455
(d) Deploy the airbag.
(1) Check that no one is inside the vehicle or within 10
m (33 ft) area around the vehicle.
(2) Press the SST activation switch and deploy the air-
bag.
CAUTION:
F
The curtain shield airbag assembly is very hot when
the airbag is deployed, so leave it alone for at least 30
minutes after deployment.
H19105
F
Use gloves and safety glasses when handling the cur-
tain shield airbag assembly with the deployed airbag.
F
Do not apply water, etc. to the curtain shield airbag as-
sembly with the deployed airbag.
F
Always wash your hands with water after completing
the operation.
F
When scrapping a vehicle, deploy the airbag and
scrap the vehicle with the curtain shield airbag as-
sembly still installed.
Author : Date :
1976