SUPPLEMENTAL RESTRAINT SYSTEM
2005 LEXUS IS300 (RM1140U)
Lock of connector is released
13.
CONNECTION OF CONNECTORS FOR FRONT AIR-
BAG SENSOR AND SIDE AND CURTAIN SHIELD AIR-
BAG SENSOR
(a)
Align the male connector (of the side of sensor) and fe-
male connector in the same direction as shown in the il-
lustration and fit in them without rubbing.
(b)
As they are fitted in, the outer slides rearward. Press it un-
til the outer returns to its original position again.
If fitting stops half way, connectors will separate.
(c)
Be sure to insert until they are locked. After fitting in, pull
them slightly to check that they are locked. (When locked,
make sure that the outer returns to its original position and
sound at the time of fitting in can be heard.)
HINT:
f
Do not fit in while holding the outer.
f
When fitting in, the outer slides. Do not touch it.
14.
DISCONNECTION OF SIDE AIRBAG CONNECTOR
(a)
Place a finger on the slider.
(b)
Slide the slider to release lock.
(c)
Disconnect the connector.
-
SRS AIRBAG
Disconnection is completed
Outer
Author :
RS-9
H01582
Outer
H01583
Date :
1925