Lexus 2005 IS300 User Manual page 1231

SUPPLEMENTAL RESTRAINT SYSTEM
Battery
SST
10 m (33 ft) or more
2005 LEXUS IS300 (RM1140U)
- CURTAIN SHIELD AIRBAG ASSEMBLY
(f) Install the SST.
Connect the connectors of the 2 SST to the curtain shield
airbag assembly connector.
SST 09082-00700, 09082-00760
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock. Also, se-
cure some slack for the SST wire harness inside the tire.
(g) Deploy the airbag.
H19103
(1) Connect the SST red clip to the battery positive (+)
terminal and the black clip to the battery negative
(-) terminal.
(2) Check that no one is within 10 m (33 ft) area around
the tire which the side airbag assembly is tied to.
(3) Press the SST activation switch and deploy the air-
bag.
HINT:
The airbag deploys simultaneously as the LED of the SST ac-
tivation switch lights up.
(h) Dispose of the curtain shield airbag assembly.
CAUTION:
F
The curtain shield airbag assembly is very hot when
the airbag is deployed, so leave it alone for at least 30
minutes after deployment.
F
Use gloves and safety glasses when handling a cur-
tain shield airbag assembly with the deployed airbag.
F
Do not apply water etc. to a curtain shield airbag as-
sembly with the deployed airbag.
H19104
F
Always wash your hands with water after completing
the operation.
(1) Remove the curtain shield airbag assembly from
the tire.
(2) Place the curtain shield airbag assembly in a vinyl
bag, tie the end tightly and dispose of it in the same
way as other general parts disposal.
Author : Date :
RS-63
1979