Lexus 2005 IS300 User Manual page 576

2005 LEXUS IS300 (RM1140U)
BODY - FRONT SEAT (Power Adjuster Type)
7. INSTALL SEATBACK COVER
(a) Install the seatback cover with new hog rings.
HINT:
When installing the hog rings, take care to prevent wrinkles as
little as possible.
(b) Install the headrest supports.
(c) w/ Table:
Install the front seatback lock with the 2 bolts, and employ
the same manner described above to the other side.
Torque: 43 N·m (440 kgf·cm, 32 ft·lbf)
(d) w/ Table:
Set the side airbag assembly wire harness to the front
seat back shield.
(e) w/ Table:
Install the front seatback shield with the screw, and
employ the same manner described above to the other
side.
(f) w/ Table:
Install the reclining adjuster release handle, and employ
H19460
the same manner described above to the other side.
(g) Hook the seatback cover hooks through the holes around
the side airbag assembly.
H15742
(h) Slide the airbag door downward to install it.
(i) Install the 2 bolts.
Torque: 4.7 N·m (48 kgf·cm, 42 in.·lbf)
H15741
(j) Install the No.1 and No.2 airbag covers.
H15740
Author : Date :
BO-179
2416