Rear Seat (Wagon) Removal - Lexus 2005 IS300 User Manual

BO-204
100mm(3.937in.) or less
A
2005 LEXUS IS300 (RM1140U)
BODY - REAR SEAT (Wagon)
REMOVAL
HINT:
A bolt without a torque specification is shown in the standard
bolt chart. (see page
1. REMOVE SEAT CUSHION ASSEMBLY
Pull up the front portion of the seat cushion assembly, then re-
move it.
NOTICE:
Hold up the clip base to prevent the cushion frame from be-
H19039
ing distorted.
2. REMOVE SIDE SEAT BACK ASSEMBLY
(a) Remove the bolt and floor anchor.
Torque: 42 N·m (428 kgf·cm, 31ft·lbf)
(b) Using a screwdriver, remove the rear seat shoulder belt
hole cover.
HINT:
Tape the screwdriver tip before use.
(c) Employ the same manner described above to the other
sides.
H18995
(d) Remove the bolt and side seat back assembly as shown
in the illustration.
Torque: 18 N·m (184 kgf·cm, 13ft·lbf)
3. REMOVE REAR SEAT FLOOR BOARD NO.4 (See
page BO-164
4. REMOVE DECK FLOOR BOX FRONT (See page
BO-164
5. REMOVE DECK BOARD NO.2 (See page
6. REMOVE REAR FLOOR BOARD NO.2 (See page
H18996
BO-164
7. REMOVE REAR FLOOR BOARD NO.3 (See page
BO-164
8. REMOVE TONNEAU COVER ASSEMBLY (See page
BO-164
9. REMOVE REAR FLOOR FINISH PLATE (See page
BO-164
10. REMOVE DECK TRIM SIDE PANEL ASSEMBLY (See
page BO-164
SS-2 )
)
)
)
)
)
)
)
Author :
BO4EC-03
BO-164 )
Date :
2441