Lexus 2005 IS300 User Manual page 1216

RS-48
SUPPLEMENTAL RESTRAINT SYSTEM
SST
Battery
Side Airbag
SST
Assembly
10 m (33 ft) or more
2005 LEXUS IS300 (RM1140U)
CAUTION:
F
F
NOTICE:
The tire will be marked by the airbag deployment, so when
disposing of the airbag use a redundant tire.
(c)
Battery
AB0158
(d)
Tires
(5 or More)
H01336
CAUTION:
Make sure that the wire harness is tight. It is very danger-
ous when loose wire harness results in the tires coming
free due to the shock from the airbag deploying.
HINT:
Place the SST connector and wire harness inside tires. Secure
at least 1 m (3 ft) of slack for the wire harness.
R05403
(e)
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock. Also, se-
cure some slack for the SST wire harness inside the tire.
H01337
- SIDE AIRBAG ASSEMBLY
Make sure the wire harness is tight. It is very danger-
ous when a loose wire harness results in the side air-
bag assembly coming free due to the shock from the
airbag deploying.
Always tie down the side airbag assembly with the
airbag deployment side facing inside.
Check functioning of the SST
(See step 1 - (a) on page
SST 09082-00700
Place the tires.
(1) Place at least 2 tires under the tire to which the side
airbag assembly is tied.
(2) Place at least 2 tires over the tire to which the side
airbag assembly is tied. The top tire should have the
wheel installed.
(3) Tie the tires together with the 2 wire harness.
Install the SST.
Connect the connector of 2 SST to the side airbag assem-
bly connector.
SST 09082-00700, 09082-00750
Author :
RS-17 ).
Date :
1964