SST
SST
SST
2005 LEXUS IS300 (RM1140U)
STEERING
-
POWER STEERING GEAR
REASSEMBLY
NOTICE:
When using a vise, do not overtighten it.
1.
COAT PARTS INDICATED BY ARROWS WITH POWER
STEERING FLUID OR MOLYBDENUM DISULFIDE
LITHIUM BASE GREASE (See page
2.
INSTALL OIL SEAL
(a)
Apply power steering fluid to a new oil seal, and install the
oil seal on the rack housing at an angle.
NOTICE:
Install the oil seal in the correct direction.
HINT:
Install the oil seal so that the port faces downward with approx.
15 degrees.
(b)
Using SST, push in the oil seal by hand until it passes
F16570
through the 2 ports.
SST
09631-00180, 09950-70010 (09951-07360)
NOTICE:
Do not turn SST when inserting the oil seal.
(c)
After the oil seal has passed through the ports, push in the
oil seal by hand until it becomes level, using SST.
SST
09950- 60010 (09951- 00430), 09950- 70010
(09951-07360)
NOTICE:
When SST is set, do not damage the inside surface of the
rack housing.
F16571
(d)
After the oil seal has become level, using SST and press,
install the oil seal.
SST
09950- 60010 (09951- 00430), 09950- 70010
(09951-07360)
F16572
Author :
Date :
SR-51
SR0UK-03
SR-38
)
1909