Lexus 2005 IS300 User Manual page 1215

SUPPLEMENTAL RESTRAINT SYSTEM
Stripped Wire Harness Section
Inner
Diam.
2005 LEXUS IS300 (RM1140U)
CAUTION:
When storing the side airbag assembly, keep the upper sur-
face of the airbag deployment side facing upward.
H08514
(b)
Wire Harness
Diameter
CAUTION:
If a wire harness which is too thin or some other thing is
used to tie down the side airbag assembly, it may be
snapped by the shock when the airbag is deployed. This is
highly dangerous. Always use a wire harness for vehicle
AB0163
use which is at least 1.25 mm
HINT:
To calculate the square of the stripped wire harness section:
H08439
Width
H08326
- SIDE AIRBAG ASSEMBLY
(3) Remove the 2 nuts and side airbag assembly.
Using a service-purpose wire harness, tie down the side
airbag assembly.
Wire harness: Stripped wire harness section
2
1.25 mm or more (0.0019 in
Square = 3.14 x (Diameter)
(1) Install the 2 nuts to the side airbag assembly.
(2) Wind the wire harness around the stud bolts of the
side airbag assembly, as shown in the illustration.
(3) Position the side airbag assembly inside the tire
with the airbag deployment direction facing inside.
Tie the side airbag assembly to the tire, as shown
in the illustration.
Tire size: Must exceed the following dimensions:-
Width: 185 mm (7.28 in.)
Inner diameter: 360 mm (14.17 in.)
Author :
2
or more)
2 2
(0.0019 in ).
2
divided by 4
Date :
RS-47
1963