Lexus 2005 IS300 User Manual page 1190

RS-22
SUPPLEMENTAL RESTRAINT SYSTEM
10 m (33 ft) or more
y
y
Weight
2005 LEXUS IS300 (RM1140U)
-
(f) Install the SST.
CAUTION:
Place the disc wheel on the level ground.
SST
(1)
SST
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock. Also, se-
H08460
cure some slack for the SST wire harness inside the disc
wheel.
(2)
H03207
(g) Cover the steering wheel pad with a cardboard box or
tires.
F
x
Size of cardboard box:
Must exceed the following dimensions:
X = 460 mm (18.11 in.)
H03205
Y = 650 mm (25.59 in.)
NOTICE:
F
When dimension Y of the cardboard box exceeds the
diameter of the disc wheel with tire to which the steer-
ing wheel pad is tied, X should be the following size.
X = 460 mm (18.11 in.) + width of tire
F
If a cardboard box smaller than the specified size is
used, the cardboard box will be broken by the shock
from the airbag deployment.
STEERING WHEEL PAD AND SPIRAL CABLE
Connect the connector of 2 SST to the steering
wheel pad connector.
09082-00700, 09082-00760
Move the SST to at least 10 m (33 ft) away from the
steering wheel pad tied down on the disc wheel.
Covering method using a cardboard box:
Cover the steering wheel pad with the cardboard
box and weight the cardboard box down in 4 places
with at least 190 N (20 kg, 44 lb).
Author : Date :
1938