Busy Verification-Ccis - NEC NEAX 2000 IPS System Manual

BUSY VERIFICATION-CCIS

General Description
This feature permits an Attendant, via the Attendant Console on the 2400 IPX or the 2000 IPS, to interrupt
a busy station's call at another switching office connected through CCIS.
Programming
START
CM08 Provide the system with Busy Verification.
Specify whether the Warning Tone is sent to
the connected parties.
• Three burst tone
[Other than New Zealand]
• One burst tone
[New Zealand Only]
Specify the Warning Tone sent to connected
parties.
Specify the Warning Tone sent to the outside
party.
CM12 Assign Service Restriction Class A to the re-
quired stations.
CM15 Allow Busy Verification in Service Restriction
Class A assigned by CM12 Y=02.
END
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
(1) 012
(2) 1 : Available
(1) 046
(2) 0 : Not sent
1 : To send
(1) 045
(2) 0 : Only once
1 : Every 4 seconds
(1) 076
(2) 0 : Not sent
1 : To send
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=09
(1) 00-15: Service Restriction Class A
1 : Allow
– 146 –
BUSY VERIFICATION-CCIS
DATA
assigned by CM12 Y=02
NWA-008853-001 Rev.3.0
97ch3002.fm