Verification Before Installing Optional Devices - NEC EXP320R Maintenance Manual

Chapter 2 Configuring and Upgrading the System

5.1.2 Verification before installing optional devices

If you add on optional devices onto this server, some devices require specific ft control software version (s).
If the optional device requires specific version number (s), refer to the following procedure before adding the
devices.
1. Confirm the version of the required ft server control software from the manuals that come with the
optional device to be added to the server. Alternatively, confirm it from the NEC website or contact
your sales representative.
2. Verify the version of the ft control software on your system.
3. After confirming that the version of ft control software is appropriate to the optional device, add the
device onto the server.
For more information on how to verify the working ft control software version, refer to Chapter 1 (2.2
Confirmation of the ft control software version) in Installation Guide.
Express5800/R320e-E4, R320e-M4, R320f-E4, R320f-M4 Maintenance Guide (VMware)
110
5. Installing and Replacing Optional Devices