Call Transfer-All Calls-Ccis - NEC NEAX 2000 IPS System Manual

CALL TRANSFER-ALL CALLS-CCIS

General Description
This feature allows a station user to transfer incoming or outgoing Central Office, intra-office and inter-
office calls to another station in the CCIS network, without Attendant assistance.
Programming
START
CM12 Assign Service Restriction Class A to the re-
quired stations.
CM15 Allow Trunk to Trunk Transfer in Service Re-
striction Class A assigned by CM12 Y=02.
CM12 Assign Service Restriction Class C to the re-
quired stations.
CM15 Allow switch hook flash capability during
C.O. line connection in Service Restriction
Class C assigned by CM12 Y=07.
CM36 Specify the combination of Trunk Routes al-
lowing a Trunk to Trunk (CCIS) Connection.
A
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction
• Y=22
(1) 00-15: Service Restriction Class A as-
(2) 1 : Allow
• Y=07
(1) X-XXXXXXXX: Station No.
(2) XX: 00-15 : Service Restriction
• Y=90, 91
(1) 00-15: Service Restriction Class C
(2) 1 : Allow
• Y=0
(1) XX ZZ
XX: 00-63 (Incoming Trunk Route)
ZZ : 00-63 (Outgoing Trunk Route)
(2) 0 : Allow
1 : Restricted
– 176 –
CALL TRANSFER-ALL CALLS-CCIS
DATA
Class A
signed by CM12 Y=02
Class C
assigned by CM12 Y=07
NWA-008853-001 Rev.3.0
97ch3002.fm