Multiple Console Operation-Ccis - NEC NEAX 2000 IPS System Manual

MULTIPLE CONSOLE OPERATION-CCIS

General Description
This feature provides console operation where Attendant Consoles are installed in more than one node in
the CCIS network.
Station Application
Attendant Console
Programming
START
CM10 Assign the card number of interface circuit for
the ATTCON/DESKCON to its associated
LEN.
NOTE:
CM14 Assign the card number of interface circuit for
the ATTCON/DESKCON to its associated
LEN.
[Series 3200 R6.2 software required]
CM30 Set the terminating system for the incoming
calls to ATTCON/DESKCON.
CM90 Assign the required Attendant Call Selection
keys, and Function keys to each ATTCON/
DESKCON.
If no data is set, the default setting is as next
page.
A
DESCRIPTION
We recommend the setting of
ATTCON number by CM14, when
using Series 3200 R6.2 software or
later.
CHAPTER 3 SYSTEM DATA PROGRAMMING
MULTIPLE CONSOLE OPERATION-CCIS
(1) 000-763: LEN
(2) E000-E007: ATTCON No.
(1) XX ZZZ (LEN)
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) E000-E007: ATTCON No.
NONE : No data
• Y=02 Day Mode
• Y=03 Night Mode
• Y=40 Mode A
• Y=41 Mode B
(1) 000-254: Trunk No.
(2) 14: Attendant Console
• Y=00
(1) ATTCON No. (E000-E007) +
No.
(2) F6000-F6067: Type of Calls to be assigned
F6100-F6245: Functions to be assigned
– 295 –
DATA
,
+ Key
NWA-008853-001 Rev.3.0
97ch3004.fm