NEC NEAX 2000 IPS System Manual page 301

B
CM36 If the 2nd data (CXX) is designated by CM58
Y=08, 09, specify the combination of trunk
routes allowing the Tandem connection.
CM71 If the 2nd data (CXX) is designated by CM58
Y=08, 09 assign the Speed Calling-System
(System Speed Dialing) memory area exclu-
sively for LDN-Outside.
CM72 Set the stored number to the Memory Slot
number allocated by CM71.
END
Operating Procedure
No manual operation is required.
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=0
(1) XX ZZ
XX: 00-63 (Incoming Trunk Route)
ZZ : 00-63 (Outgoing Trunk Route for
(2) 0: Allow
(1) 66: Exclusive for LDN-Outside
(2) XXX ZZZ
XXX: 000-299 (Starting Memory Slot No.
ZZZ : 001-300 (No. of Slots to be
NONE : No data
• Y=0
(1) 000-299: Memory Slot No.
(2) XXXX
XXXX : Access Code (Maximum 4 digits)
,
YY...Y : Calling Party's No.
– 287 –
LDN NIGHT CONNECTION-CCIS
DATA
CCIS)
in Block)
assigned in Block)
,
YY...Y
: Separator Mark
(Maximum 26 digits)
NWA-008853-001 Rev.3.0
JANUARY/31/2006
97ch3004.fm