NEC NEAX 2000 IPS System Manual page 227

SMDR with AP00 Programming (PN-AP00-B/PN-AP00-D with MRCA
program) (2)
[Series 3300 software required]
For local office or tandem office, in addition to the programming of SMDR with AP00 programming (PN-
AP00-B/PN-AP00-D with MRCA program), do the following programming. For details of the SMDR
with AP00 programming (PN-AP00-B/PN-AP00-D with MRCA program), refer to Station Message De-
tail Recording (SMDR) of Feature Programming Manual.
START
CM08 Not provide the system with MP built-in
SMDR.
NOTE:
Not provide the system with Centralized Bill-
ing-CCIS for Center Office.
Provide the system with Centralized Billing-
CCIS for Local Office.
Specify whether the calling party information
(Trunk Route No./Station No.) is sent to
SMDR on CCIS tandem calls.
See Example 2: Data Assignment of SMDR
Call Record on a Tandem Call through
Page 225
A
DESCRIPTION
Do not assign CM40 Y=00>14
when using MP built-in SMDR in
Local Office of Centralized Billing-
CCIS.
CHAPTER 3 SYSTEM DATA PROGRAMMING
(1) 800
(2) 1 : Not provided
(1) 368
(2) 1 : Not provided
INITIAL
(1) 378
(2) 0: To provide
(1) 377
(2) 0 : Station No. and Office No.
1 : Trunk Route No.
CCIS.
– 213 –
CENTRALIZED BILLING-CCIS
DATA
(AP00 is effective)
NWA-008853-001 Rev.3.0
97ch3003.fm
JULY/01/2006