NEC NEAX 2000 IPS System Manual page 155

A
CM72
CM52 Assign the Hot Line pairs.
Bidirectional Hot Line should be assigned as
follows:
Hot Line
Pair No.
00
01
NOTE 1:
CM90 Assign the Virtual Line station and RELEASE
keys on the D
END
Operating Procedure
To access a Brokerage-Hot Line-CCIS from a D
1. Lift the handset or press the Speaker key.
2. Press the line/feature key associated with the preassigned station.
The destination station is automatically dialed, ring back tone is heard and the destination station
answers.
3. After completion of conversation, hang up or press the Speaker key.
To make another Brokerage-Hot Line-CCIS call immediately, press another line/feature key without going
on hook and off hook.
DESCRIPTION
Calling Side Called Side
Station A Station B
Station B Station A
Up to 100 Hot Line stations (50
pair) can be set.
term
.
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=2
(1) 000-299: Memory Slot No.
(2) XXX...X: Station Name Character by
• Y=00-99 Hot Line pair No.
(1) 0: Calling Station
1: Called Station
(2) Station No.
E00X
X: 0-7: ATTCON No. assigned by CM06
CXX (For Called Outside party)
XX: Abbreviated Code given by CM71
NOTE 2:
• Y=00
(1) My Line No. +
(2) X-XXXXXXXX: Virtual Line station No.
F1020: Release key
term
:
– 141 –
BROKERAGE-HOT LINE-CCIS
DATA
MAT/CAT (Maximum 16 char-
acters)
Y=01
Do not assign station number
with first digit "0".
,
+ Key No.
NWA-008853-001 Rev.3.0
97ch3002.fm