NEC NEAX 2000 IPS System Manual page 187

Programming
START
CM10 Assign the Digital Announcement Trunk card
number to the required LEN.
(For Intercept Announcement only.)
NOTE:
CM12 Assign Service Restriction Class A to the re-
quired stations.
(For Intercept Announcement only.)
CM15 Allow Digital Announcement Trunk access in
Service Restriction Class A assigned by CM12
Y=02.
(For Intercept Announcement only.)
CM49 Set the function to each Digital Announcement
Trunk accommodated into the system.
(For Intercept Announcement only.)
CM51 Assign a destination for the intercepted call for
each tenant.
A
DESCRIPTION
The Digital Announcement Trunk
card number must be assigned to the
1st LEN (Level 0), the 3rd LEN
(Level 2), the 5th LEN (Level 4), and
the 7th LEN (Level 6) of each LT
slot.
CHAPTER 3 SYSTEM DATA PROGRAMMING
CALL FORWARDING-INTERCEPT-CCIS
(1) 000-763: LEN
(2) EB002-EB127: Digital Announcement
For PIM0/PIM1: EB002-EB031
For PIM2/PIM3: EB032-EB063
For PIM4/PIM5: EB064-EB095
For PIM6/PIM7: EB096-EB127
NOTE:
• Y=02
(1) X-XXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction
• Y=33
(1) 00-15: Service Restriction Class A
(2) 1 : Allow
• Y=00
(1) 000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk No.
(2) 0A00: Call Forwarding-Intercept An-
nouncement
• Y=07
(1) 00-63: Tenant No.
(2) EB000-EB127 : Digital Announcement
X-XXXXXXXX: Station No.
E000
– 173 –
DATA
Trunk Card No.
EB000 and EB001 are dedicated
to built-in Digital Announcement
Trunk of the MP card.
Class A
assigned by CM12 Y=02
(EB002-EB127)
Trunk Card No.
: Attendant Console
NWA-008853-001 Rev.3.0
97ch3002.fm