Call Back-Ccis - NEC NEAX 2000 IPS System Manual

CALL BACK-CCIS

General Description
This feature provides inter-office Call Back. A station that has dialed a busy station at another office can
set Call Back-CCIS by dialing a feature access code. When this feature has been set, the setting station will
ring as soon as the busy station becomes available.
Programming
START
CM12 Assign Service Restriction Class A to the re-
quired stations.
CM15 Allow Call Back in Service Restriction Class
A assigned by CM12 Y=02.
CM20 Assign the access code for Call Back.
CM90 Assign a Call Back key to the D
END
DESCRIPTION
term
, if desired.
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction
• Y=03
(1) 00-15: Service Restriction Class A as-
(2) 1 : Allow
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
For setting the different access code from OG
Trunk Queuing:
(2) A002: Call Back Set
A003: Call Back Cancel
For setting the same access code as OG Trunk
Queuing:
(2) A004: Set
A005: Cancel
• Y=00
(1) My Line No. +
(2) F0004: Trunk Queuing-Outgoing/Call
– 148 –
CALL BACK-CCIS
DATA
Class A
signed by CM12 Y=02
,
+ Key No.
Back
NWA-008853-001 Rev.3.0
JANUARY/31/2006
97ch3002.fm