Centralized Day/Night Mode Change-Ccis - NEC NEAX 2000 IPS System Manual

CENTRALIZED DAY/NIGHT MODE CHANGE-CCIS

General Description
This feature switches the Day/Night Mode of a remote office, linked to the main office (2400 IPX) via
CCIS, in accordance with the Day/Night Mode switching on the Attendant Console at the main office.
• For Satellite Office
If the Attendant Console is required in the Satellite Office, the following programming is required.
START
CM60 Assign as ineffective Trunk Restriction Class
change by NT (Night) switch on ATTCON/
DESKCON.
Assign as ineffective outgoing call restriction
on Night Mode by NT switch on ATTCON/
DESKCON.
Assign as ineffective Day/Night Mode Change
by NT switch on ATTCON/DESKCON.
END
SATELLITE OFFICE
CCIS
2000 IPS
DESCRIPTION
INITIAL
INITIAL
INITIAL
CHAPTER 3 SYSTEM DATA PROGRAMMING
CENTRALIZED DAY/NIGHT MODE CHANGE-CCIS
MAIN OFFICE
2400 IPX
• Y=02
(1) 0-7: ATTCON No.
(2) 1 : Ineffective
• Y=04
(1) 0-7: ATTCON No.
(2) 1 : Ineffective
• Y=06
(1) 0-7: ATTCON No.
(2) 1 : Ineffective
– 244 –
ATT
DATA
NWA-008853-001 Rev.3.0
97ch3004.fm