NEC NEAX 2000 IPS System Manual page 286

To set an outside party through CCIS as a destination of transferred call
START
CM11 Assign the Virtual Line station number to the
required LEN.
CM12 Assign Service Restriction Class A to each sta-
tion.
CM15 Assign Call Forwarding-All Calls-Outside to
Service Restriction Class A assigned by CM12
Y=02.
CME6 Assign Call Forwarding-All Calls-Outside to
the Virtual Line station number assigned by
CM11.
CM08 For system with multiple-tenant, specify the
tenant of calling station as the destination of a
call transferred in CM51 Y=10.
CM51 Assign the destination of the call when called
station is set to Do Not Disturb as Virtual Line
station assigned by CM11.
END
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
(1) 000-255: Virtual LEN
(2) X-XXXXXXXX: Virtual Line Station No.
• Y=02
(1) X-XXXXXXXX: Virtual Line Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=26
(1) 00-15: Service Restriction Class A as-
(2) 1 : Allowed
• Y=00 Call Forwarding-All Calls
(1) X-XXXXXXXX: Virtual Line Station No.
(2) Destination No.: X-XXXX +
X-XXXX: Outgoing Trunk (1-4 digits)
,
YY···Y : Called No. (Maximum 26 dig-
NONE
(1) 241
(2) 1 : Tenant of calling station
• Y=10
(1) 00-63: Tenant No.
(2) X-XXXXXXXX: Virtual Line Station No.
– 272 –
DO NOT DISTURB-CCIS
DATA
assigned by CM11
signed by CM12 Y=02
assigned by CM11
,
: Separate Mark
its)
: No data
assigned by CM11
NWA-008853-001 Rev.3.0
JANUARY/31/2006
+ YY···Y
97ch3004.fm