Station-To-Station Calling-Ccis - NEC NEAX 2000 IPS System Manual

STATION-TO-STATION CALLING-CCIS

General Description
This feature permits any station user to dial another station directly, through CCIS, without Attendant
assistance.
Programming
In addition to the programming of flexible station numbering, perform the following programming:
START
CM10 Assign a station number to each LEN.
NOTE 1:
NOTE 2:
CM14 Assign a station number to each LEN.
[Series 3200 R6.2 software required]
NOTE:
A
DESCRIPTION
We recommend the setting of station
number by CM14, when using Series
3200 R6.2 software or later.
To the following stations, 5 or more
digits station number must not be
assigned.
• Stations observed by SMDR/
PMS/OAI
• Front Desk Terminal/D
(CIS)
To the following stations, 5 or more
digits station number must not be
assigned.
• Stations observed by SMDR/
PMS/OAI
• Front Desk Terminal/D
(CIS)
CHAPTER 3 SYSTEM DATA PROGRAMMING
(1) 000-763: LEN
(2) X-XXXXXXXX: Station No.
term
TIMS
(1) XX ZZZ (LEN)
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) X-XXXXXXXX: Station No.
NONE : No data
term
TIMS
– 315 –
STATION-TO-STATION CALLING-CCIS
DATA
NWA-008853-001 Rev.3.0
97ch3005.fm