NEC NEAX 2000 IPS System Manual page 249

Centralized Billing Programming Steps for Pattern 3
To SMDR 0: Setting of billing information from Local Offices.
To SMDR 1: Setting of billing information from Center Office.
Use two SMDR terminals, one for Port 0 and one for Port 1.
CM05 Y=0>XX : 45 (AP00)
CMDD99>0000 : CCC (Data All Clear)
CMDD00>3 : 1 (Center Office)
CMDD02>0 : No. of call record for SMDR 1
>1 : 0 (Not record)
>2 : 0 (Not record)
CMDD98>0000 : CCC
CM08>800 : 1 (AP00)
>368 : 0 (Center Office)
>378 : 1 (Not Local Office)
CMA7 Y=03>0 : 1 (Distant Office is Local Office)
=04>0 : NONE
CMDD01>239 : 2 (SMDR 1)
CM04 Y=01>09 : Desired setting
>06 : 3 (AP00 with MRCA program)
>03 : 2 (AP00 with MRCA program)
CMDD01>100 : 3 (SMDR with NEAX 2400 IMS Format)
>101 : 3 (SMDR with NEAX 2400 IMS Format)
CMDD10>000 : 1 (SMDR 0)
>100 : 2 (SMDR 1)
>001 : Data Speed (Port 0)
>101 : Data Speed (Port 1)
>002 : Stop Bit (Port 0)
>102 : Stop Bit (Port 1)
>003 : Data Length (Port 0)
>103 : Data Length (Port 1)
>004 : Parity (Port 0)
>104 : Parity (Port 1)
>005 : 48 (Port 0)
>105 : 48 (Port 1)
>006 : UA (Port 0)
>106 : UA (Port 1)
>010 : 0 (Port 0)
>110 : 0 (Port 1)
CM12 Y=45 : XX (Station Class No.)
CM60 Y=32 : XX (Class No.)
CENTER OFFICE
– 235 –
CHAPTER 3 SYSTEM DATA PROGRAMMING
LOCAL OFFICE A/B
45 (AP00)
CCC
0 (Local Office)
Desired setting
Desired setting
No. of call record Local Office
CCC
1
1 (Local Office)
0 (Not Center Office)
0 (Distant Office is Center Office)
Point Code of Center Office
0 (Not Centralized Billing Office)
Desired setting
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
Default
XX (Station Class No.)
XX (Class No.)
CENTRALIZED BILLING-CCIS
NWA-008853-001 Rev.3.0
97ch3003.fm