NEC NEAX 2000 IPS System Manual page 185

CALL FORWARDING-DON'T ANSWER-CCIS/MULTIPLE CALL FORWARDING-DON'T ANSWER-CCIS
term
D
To set a Call Forwarding-Don't Answer-CCIS from a D
1. Lift the handset or press the Speaker key and receive dial tone.
2. Press the Call Forwarding-Don't Answer feature key and receive Feature Dial Tone.
3. Dial the outgoing trunk access code and receive a single burst of Service Set Tone.
(This operation is required for a network using Open Numbering Plan.)
4. Dial the desired target station number and receive Service Set Tone.
5. Wait approximately five seconds and receive Service Set Tone. The LED lights. The LCD shows:
6. Replace the handset or press the Speaker key.
To cancel a Call Forwarding-Don't Answer-CCIS from a D
1. Lift the handset or press the Speaker key and receive dial tone.
2. Press the Call Forwarding-Don't Answer feature key. The LCD shows:
3. Dial " " and receive Service Set Tone. The LED of the associated feature key will go out. The
LCD shows:
4. Replace the handset or press the Speaker key.
CHAPTER 3 SYSTEM DATA PROGRAMMING
term
:
SET XXXX
(TIME DISPLAY)
Forwarding station number
term
CF NANS YYY
(TIME DISPLAY)
CANCEL
(TIME DISPLAY)
– 171 –
:
NWA-008853-001 Rev.3.0
97ch3002.fm